News

HOME>>News

The decorative lamp manufacturer introduces five maintenance rules for lamps after decoration

2022-08-16


Everyone has a different understanding of home. How to decorate the most perfect home with limited funds? In the home decoration, many owners are very concerned about the decoration cost. Therefore, planning must be done before decoration. Only planning can reduce costs. If you compare the room without decoration to canvas, and the decoration to a painting process, the lighting is the finishing touch of this home painting.


However, if proper cleaning and maintenance are not carried out, even high-grade lighting will soon fade. Like other furniture, lamps and lanterns also need regular cleaning and maintenance in order to maintain the brightness of lighting and prolong the life of lighting. The lampshade is getting dark due to dust. If it is not handled in time, the brightness will decrease by about 30% on average every year. Therefore, it is particularly important to regularly clean the lampshade and lamp tube or bulb.


1、 After buying back the lamps, do not rush to install them. Carefully read the lamp signs and installation and operation instructions, and then install and use the lamps according to the instructions, otherwise there will be danger;


2、 Replace the aging lamp tube in time according to the light source parameters provided by the sign. If the two ends of the lamp tube are red, the lamp tube is black or has black shadow, and the lamp tube cannot jump, the lamp tube shall be replaced in time to prevent unsafe phenomena such as ballast burning;


3、 During cleaning and maintenance, attention shall be paid not to change the structure of lamps and lanterns, nor to replace the parts of lamps and lanterns at will. After cleaning and maintenance, the lamps and lanterns shall be installed as they are, and no missing or wrong parts and lanterns shall be installed;


4、 In order to prolong the service life of lamps, the maintenance should be strengthened. The lamp tubes in the room shall be frequently wiped with dry cloth, and attention shall be paid to prevent moisture from invading, so as to avoid corrosion damage or leakage short circuit after a long time; Lamps installed in toilets and bathrooms must be equipped with moisture-proof lampshades, otherwise the service life will be greatly shortened; The lamp installed in the kitchen should pay special attention to prevent oil smoke, because the accumulation of oil dirt will affect the lighting degree of the lamp; The light colored lampshade has good light transmittance, but it is easy to stick to dust. It should be wiped diligently to avoid affecting the light penetration; If the lamp is non-metallic, it can be wiped with a wet cloth to avoid dust accumulation and hinder the lighting effect;


Fifth, when using lamps, try not to switch on and off frequently, because at the moment of frequent startup, the current through the filament is greater than the current during normal operation, so that the filament temperature rises sharply and accelerates sublimation, which will greatly reduce its service life. Therefore, it is necessary to reduce the switch of lamps as much as possible.


Special reminder:

Moisture can easily lead to rust and paint falling, and shorten the service life of lamps. Therefore, moisture-proof is the key to lighting maintenance, especially the lamps and lanterns in the bathroom and kitchen should be installed with moisture-proof lampshades to prevent moisture intrusion, corrosion damage or electric leakage short circuit.

Do not wash the lamp with water. Just clean it with a dry rag. If you accidentally touch the water, try to dry it. Do not wipe with a wet cloth immediately after turning on the light.


GET IN TOUCH

*
 
*
 
*
Home E-mail Tel